午夜烟灰 发表于 2009-7-29 22:04

都进来看看

英文好的顺便介绍下。。。大概什么意思
NEMMAN 凸轮轴的介绍
Road camshaft - PH1

This is a camshaft that would be used for road use and will normally run with standard carb or injection system and can be fitted without additional tuning equipment. It is meant for town use and will have a smooth tick-over and will give it's increase in power in the low mid-range. Other modifications to the engine will increase the performance of this cam.

午夜烟灰 发表于 2009-7-29 22:05

这是 PH2的介绍
Fast Road camshaft - PH2

This is a camshaft for increasing mid-range of the engines and is meant for mild competition use and where the driver requires an increase of power in the mid-range without suffering too much loss of power in the low-range. The tick-over will be heavier than a stan­dard engine. The fuel system may have to be modified and the cam will work to its optimum with modifications to the cylinder head, inlet/exhaust system and possibly the management system.

午夜烟灰 发表于 2009-7-29 22:06

雪铁龙所有车系的都有
自己点下http://www.lioliosracing.gr/pdf/Newman/Citroen.htm

fissa 发表于 2009-7-29 22:20

纽曼?!gochinway50;)

午夜烟灰 发表于 2009-7-29 22:46

我就知道F大只会摸摸下巴,转转眼珠子

fissa 发表于 2009-7-29 23:04

上会团购~~没人响应~~何况也没我用的~gochinway47;)

午夜烟灰 发表于 2009-7-30 00:06

你看3楼

fissa 发表于 2009-7-30 00:15

没有化油器的。。。gochinway06;)
页: [1]
查看完整版本: 都进来看看


速道改装车社区论坛所有帖子仅代表作者本人意见,不代表本网站立场。
转载文章请注明作者及出自"速道性能车改装车网(http://www.chinway.com.cn)",如用于商业用途请联系原作者

拒绝任何人以任何形式在本论坛发表与中华人民共和国法律相抵触的言论!

©2007-2020 速道性能改装车网